Push Button

Remotely operated from a security lodge or reception, the push buttons open, stop and close the equipment accordingly.

Intercom Range

Communication takes place between the slave station and security or reception. A push button is activated to open the equipment. Safety and closing facilities can be by induction loop or photo-electric cell.

Keypad

A code is entered into the keypad and the equipment opens. Safety and closing facilities can be by induction loop or photo-electric cell.

Proximity Card Control

The users card is placed over the reader, which reads the information. Assuming the card is valid, the equipment opens. Safety and closing facilities can be by induction loop or photo-electric cell.

Radio Control

The vehicle occupant or security officer presses the button located on the transmitter. The equipment opens and the vehicle proceeds. The equipment can be closed by again pressing the transmitter or by induction loop or photo-electric cell.

Flow Control Plates

Designed to encourage a one way traffic flow and prevent unauthorised Entry/Exit within any location. Counter balance action with noise reduction buffers to allow smooth operation. Ideal for use on tarmac or softer road surfaces.

Height Restrictors

Standard Height 2.1m (can be manufactured to customer specification). Spans from 6m to 12m manufactured to customer specification.

Hoop Barriers

Height Above Ground: 650mm
Span: 1400mm
Diameter: 76mm
Weight: 37Kg
Galvanised or Powder Coated to Customers Requirements

Manual Barriers

Spans from 3 metres to 7 metres.
Pole Diameter 75mm. Pivot assembly made of steel box section, zinc plated shaft pivoting on two heavy duty bearing blocks.

Speed Bumps

Heavy duty recycled PVC segments for early visual warning. 70mm Height to apply speed restriction of 5mph. Provided with centre run cable tunnel for temporary traffic lights, fair grounds, water supplies etc.